Double-sided tape is very versatile, so it can be used for different purposes. However, removal can be tricky; therefore, in order not to run the risk of spoiling the paintings of the places, now find out valuable tips for how to remove double sided tape from wall.
Read too: Homemade recipe with 2 ingredients to clean stove
see more
Decreasing children's screen time: promote a lifestyle…
Toxicity Alert! Dyed clothes can make you sick for THIS
This product was created more than 50 years ago, it is composed of plastic or adhesive foam. It has become widely used because it is easy to apply, relatively simple to remove, fixes well, and can even replace screws and nails depending on the case.
With the proper techniques, the chance of damaging walls and other surfaces when removing the tape is much smaller.
At first, remove one end of the tape from the area, then unroll the rest. You can pull it out with your fingertips or with the help of tweezers. If removal is difficult, use a piece of nylon thread to remove the glue between the tape and the surface, then apply a little alcohol to the area to remove product residues.
Another way to get rid of tape glue is to use a heat source; the hair dryer is perfect for this. However, observe whether the tape in question has thermal resistance, if so, try another way.
To do the removal with the dryer, just turn on the device and direct the air to the tape at the highest temperature, on the edges and corners. Check if it's starting to come loose and pull the ends of the ribbon.
On plastic or glass surfaces oil (or olive oil) can be a valuable resource. Just put a few drops on top, let it act for about 5 minutes and try to remove the tape with the help of a sponge. After removing it, it is important to clean the place with alcohol so that there are no residues and to avoid stains.
You can make the preparation with a 200ml glass of water, about 2 tablespoons of vinegar and a few drops of common detergent. Dab the spot with a sponge, removing the tape will be easier this way.