Learn how to change the gas and the care that must be taken

It's very common that sometimes you forget to ask someone to change the gas, and in the middle of preparing a meal, you can't finish cooking. However, your troubles are over now! Learn now how you can change your gas yourself, maintaining proper care. Check it out below.

Read more: Second stage of Vale Gás starts this Monday in Pará

In the period before the replacement of the gas cylinder

• Make sure that all the burners on your stove are off, remembering to check this on the buttons that light the flames;
• Check that there are no flammable points, flames, embers, sparks or any other means of heat nearby. The ideal is that the place is open and ventilated. So, if possible, open windows and doors;
• Always load your gas cylinder vertically, preventing it from rolling, both the new one and the old one which is, theoretically, empty.

Step by step to change your gas

• turn off logging

The first step in learning how to replace gas is to turn off the register and other sources of ignition and sparks nearby. If necessary, use a kitchen hammer to give you more strength (this item should be part of your list of essential kitchen utensils).

• Sterilize the cylinder

Ideally, you clean your cylinder with a cleaning product and a dry cloth as soon as the cylinder is delivered to you.

• Carefully remove the seal

A very common mistake is to remove the seals with sharp objects. For your safety, always carefully remove the seal by hand. Therefore, avoid using knives or scissors during this step, as this could damage the valve.

• Remove the pressure regulator

Take your empty cylinder, remove the pressure regulator and then place it on the new valve, using only your hands.

Make sure everything is in order

• Test for gas leakage

Take a sponge soaked in soapy water and run it over the valve to check that there are no gas leaks. If bubbles come out of the foam, you will realize that your gas is leaking, and then you will have to repeat the installation process.

• If the leak persists, call for help.

Finally, always check that the structure of the installation is correct. However, in case of persistent leakage, do not hesitate to turn off the register and call the tag number, thus calling a qualified professional.