It is very common that, in areas that receive a lot of moisture, metal surfaces are left with rust marks due to oxidation. In addition, rust, if not removed, can end up corroding surfaces or metal objects, such as pans, for example. So, learn how to take care of these items and see how to remove those rust marks to prevent them from appearing.
Read more: Check out 3 tips on how to remove rust stains from the floor
see more
Decreasing children's screen time: promote a lifestyle…
Toxicity Alert! Dyed clothes can make you sick for THIS
Bathrooms and kitchens are probably the places in your home that suffer the most from this problem, because of the humidity present in these spaces. This way, see the step by step to remove rust from metals in the kitchen and bathroom of your home.
You can remove rust from metal using techniques such as using fine sandpaper or steel wool to remove the thicker layer caused by oxidation on surfaces. Both are effective at removing rust, but be careful not to rub too hard and damage the surface.
If the rust is not very strong, it can be removed with vinegar. For example, small or removable parts can be soaked in a container half vinegar and half water for 2 hours.
After dipping the pieces in this mixture, use steel wool to remove rust marks from the metal. Then rub gently to remove the scabs, repeating the process if necessary.
After cleaning, it is recommended to apply a rust inhibitor to the surface. If the problem persists, in addition to this product, it may be necessary to coat the affected surface with a coat of anti-rust paint, followed by enamel or galvanized paint to prevent the appearance of rust again.
Okay, we've already covered how to clean rusty metal, but what if you knew how to prevent rust? Well, know that there is a solution. Check out the following 3 tips:
A good way to prevent rust corrosion, especially outdoors, is to keep the surface paint fresh and in good condition.
Indoors, try to keep the kitchen, bathroom and cupboards always dry and free of moisture.
Finally, in addition to regular maintenance, a light coat of lubricant should be applied to prevent rust stains on metal surfaces and fixtures.
